Back to List

Bare Die Data Sheet: 74HC164

74HC164 is an 8–bit, serial–input to parallel–output shift register. x2 serial data inputs are provided so that 1 input may be used as a data enable. Data is entered on the rising clock edge. Asynchronous reset overrides clock & serial data inputs.
The device directly replaces legacy National 74HC164, Motorola 74HC164, RCA HARRIS 74HC164 and Texas Instruments SN74HC164, CD74HC164.
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
  • Gated serial data inputs
  • Asynchronous master reset
  • Output Drive Capability:  10 LSTTL loads
  • Outputs Directly Interface to CMOS, NMOS, and TTL
  • Operating Voltage Range: 2.0 to 6.0V
  • Low Input Current:  1.0µA
  • High Noise Immunity Characteristic of CMOS Devices
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 1.452mm² (2250.917mil²)
X: 1060µm (42mil)
Y: 1370µm (54mil)
  Request Pad Layout

In Stock: Available on request
Product Families: Used for this device are tabulated below.
Functional:
  • I/P Level: CMOS
  • O/P Level: CMOS
  • 3-State O/P: No
Specification:
VCC (Min): 2.00V
VCC (Max): 6.00V
fMIN @ VNOM: 28MHz
tpd (Max) @ VNOM: 37.0ns
ICC (Max) @ VNOM: 0.08mA
VNOM (Max): 6.00V
Output Drive (Max): 5.2mA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.