Back to List

Bare Die Data Sheet: MM74C906

MM74C906 uses CMOS technology to achieve open-drain outputs & consists of 6 inverters driving 6 N-channel devices. The open-drain feature of the buffers enables level shifting or wire AND / wire OR functions by adding pull-up or pull-down resistors.
Replacement for National / TI, Fairchild/ON Semi MM74C906M, MM74C906M_NL, MM74C906MX, MM74C906MX_NL, MM74C906M_Q, MM74C906N, MM74C906N_NL, MM74C906N_Q, MM74C906J/NOPB, MM74C906 & 74C906. Available in Bare Die, 14-lead SOIC & 14-lead PDIP.
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
  • Available in Bare Die, PDIP and SOIC packages
  • Direct equivalent / drop-in replacement for obsolete Fairchild / ON Semi or National / Texas Instruments versions
  • Wide supply voltage range: 3V to 15V
  • Guaranteed noise margin: 1V
  • High noise immunity: 0.45 VCC (typ.)
  • High current sourcing and sinking open drain outputs

Applications:

  • Active-High Wired-AND or Active-Low Wired-OR Functions
  • Bus contention protection
  • Voltage translation
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 2.673mm² (4143.473mil²)
X: 1640µm (65mil)
Y: 1630µm (64mil)
  Request Pad Layout

In Stock: Available on request
Product Families: Used for this device are tabulated below.
Functional:
  • I/P Level: Single-Ended
  • O/P Level: Open Drain
  • Bits: 6
  • 3-State O/P: No
  • Schmitt Trigger: No
Specification:
VCC (Min): 3.00V
VCC (Max): 15.00V
fMIN @ VNOM:   n/a
tpd (Max) @ VNOM: 75.0ns
ICC (Max) @ VNOM: 0.0500mA
VNOM (Max): 10.0V
Output Drive (Max): 12.0mA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.