Back to List

Bare Die Data Sheet: 54HCT04

The 54HCT04 Hex Inverter is produced on a 2.5µm 5V CMOS process. The device performs Boolean function Y=Ā in positive logic & commonly interfaces TTL or NMOS outputs to High–Speed CMOS inputs. Device inputs directly accept LSTTL or CMOS.
Direct replacement for legacy Fairchild 54HCT04, National 54HCT04, Motorola 54HCT04 & Texas Instruments SN54HCT04, CD54HCT04. Device operates over the full military temperature range & is well suited for high reliability applications.
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
  • Speed of LSTTL with CMOS low power consumption
  • Output Drive Capability:  10 LSTTL loads
  • Inputs directly accept LSTTL
  • Outputs Directly Interface to CMOS, NMOS, and TTL
  • Low Input Current:  1.0µA
  • Military Temperature Range for High Reliability
  • Lower power alternative to bipolar logic
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 1.755mm² (2720.258mil²)
X: 1300µm (51mil)
Y: 1350µm (53mil)
  Request Pad Layout

In Stock: 26454

MIL-STD Qualification:
  38534 Class K LAT 
Product Families: Used for this device are tabulated below.
Functional:
  • I/P Level: CMOS/TTL
  • O/P Level: CMOS
  • Bits: 6
  • 3-State O/P: No
  • Schmitt Trigger: No
Specification:
VCC (Min): 4.50V
VCC (Max): 5.50V
fMIN @ VNOM: 25MHz
tpd (Max) @ VNOM: 22.0ns
ICC (Max) @ VNOM: 0.0400mA
VNOM (Max): 5.5V
Output Drive (Max): 5.2mA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.