Back to List

Bare Die Data Sheet: SiS1200M2160

1200 Volt 17 Amp Silicon Carbide MOSFET specified at ≥ 175°C maximum junction temperature. Metalized with Aluminum on topside for wirebonding and Silver on bottom side for solder attach. Small die size for high integration.
This rugged bare die offers increased power density, high operating temperature / reduced cooling requirement & improves system reliability. Higher speed switching is possible with lower conduction losses over temperature for increased efficiency.
Features:
  • Capable of high temperature operation ≥ 175°C
  • Rugged performance in smallest form factor
  • Typ RDS(on) = 175mΩ at VGS=20V, ID=10A
  • High Speed Switching with Low Capacitance
  • Ease of Paralleling
  • Resistant to Latch-up
  • High Gate Resistance for Drives

Applications:

  • High Temperature Electronics
  • Industrial Motor Loads
  • Wind Generation Inverter
  • Solar Inverter
  • EV battery chargers
  • High voltage DC/DC converters
  • UPS
  • Switching Power Supplies
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 4mm² (6199.987mil²)
X: 2000µm (79mil)
Y: 2000µm (79mil)
  Request Pad Layout

In Stock: 125
Product Families: Used for this device are tabulated below.
Functional:
  • Technology: Gen 2
Specification:
VDSS: 1,200V
VGS: -10/+25V
VGS(th)min: 2.0V
ID: 17A
EAS:   n/a
RDS(ON): 175mΩ
RDS(on) @ Thigh: 300mΩ
Qg: 26nC
COSS: 35pF
QrrBody Diode: 40nC
trrBody Diode: 6ns
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.