This device suits hybrid & MCM designers needing high reliability with fixed -15V negative voltage regulation. This bare die can replace National (TI) LM79L15, LM79L15AC MDA, UA79L15 (TI) & Motorola (MOT) or ON Semi MC79L15, MCC79L15.
Features:
- 5% voltage output tolerance
- Wide input voltage range
- Internal Short-Circuit Current Limiting
- Internal Thermal Overload Protection
- No external components required
- Military Temperature Range for High Reliability
- Provides Point-of-Source regulation with lower noise
- x2 magnitude impedance improvement with lower bias current and noise when replacing Zener diode/resistor combinations
- Can be used with power-pass elements to make high-current voltage regulators
Vendor:
Silicon Supplies
Electrical Datasheet
Die Physical Data:
Footprint: 0.94mm² (1457.005mil²)
X: 1000µm (39mil)
Y: 940µm (37mil)
Request Pad Layout
In Stock: Available on request
Silicon Supplies
Electrical Datasheet
Die Physical Data:
Footprint: 0.94mm² (1457.005mil²)
X: 1000µm (39mil)
Y: 940µm (37mil)
Request Pad Layout
In Stock: Available on request
Product Families: Used for this device are tabulated below.
Functional:
- Output: -
- Output Capacitor: -
Specification:
VIN (MIN): -17.50V
VIN (MAX): -30.00V
IOUT (MAX): 0.10A
VOUT (MIN): -14.40V
VOUT (MAX): -15.60V
VDO: 1,700mV
Accuracy: 4.0%
IQ: 3,500.0000mA
Noise Figure: 340µVrms
PSRR @ 100KHz: 63dB
VIN (MAX): -30.00V
IOUT (MAX): 0.10A
VOUT (MIN): -14.40V
VOUT (MAX): -15.60V
VDO: 1,700mV
Accuracy: 4.0%
IQ: 3,500.0000mA
Noise Figure: 340µVrms
PSRR @ 100KHz: 63dB
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.