Back to List

Bare Die Data Sheet: SiS17601


The SiS17601 dual high-speed MOSFET driver sinks /sources up to 4A & finds use in high-frequency circuits due to fast switching time & low propagation delay. Each channel is controlled via non-inverting TTL logic input & enable pins.
This device benefits from low input capacitance and drives capacitive load with high speed. Bare die form suits implementation in magnetic environments and in high integration / small size applications.
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
  • Wide single-supply voltage range +4V to +14V
  • Input voltage spike protection up to +14V
  • Up to 4A peak output current (Sink/Source)
  • High speed 5ns/5ns tr/tf at 1nF load
  • Propagation delays matched between channels
  • Low Input Capacitance: 10pF (typ)
  • Thermal Shutdown
  • Committed long term support with no die mask changes.

Applications:

  • Power-Supply Modules
  • SMPS Power Supplies
  • DC-DC Conversion
  • Motor Control
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 4.43mm² (6867.141mil²)
X: 2080µm (82mil)
Y: 2130µm (84mil)
  Request Pad Layout

In Stock: Available on request
Product Families: Used for this device are tabulated below.
Functional:
  • Type: High / Low Side
  • I/P Level: TTL
  • Config: Non-inverting
Specification:
VS (Min): 4V
VS (Max): 14.00V
IO (PEAK): 4A
tr: 5ns
tf: 5ns
tpd: 10ns
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.