Back to List

Bare Die Data Sheet: 74HC4060

14-stage Ripple-carry Counter/Divider & Oscillator with 3 oscillator terminals, 10 buffered parallel outputs & Reset. High-to-low clock input increments the counter. Reset is asynchronous & disables the oscillator for low standby power consumption.
Direct replacement for legacy Fairchild 74HC4060, National 74HC4060, Motorola 74HC4060 & Texas Instruments SN74HC4060, CD74HC4060.
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
  • Oscillator configuration allows either RC or crystal oscillator design
  • Input compatibilty with standard CMOS outputs and LSTTL outputs with use of pull-up resistors
  • Inputs protected against ESD and transient voltage
  • All inputs and outputs buffered
  • Speed of LSTTL with CMOS low power consumption
  • Output Drive Capability:  15 LSTTL loads
  • Outputs Directly Interface to CMOS, NMOS, and TTL
  • Operating Voltage Range: 2.0 to 6.0V
  • Low Input Current:  1.0µA
  • High Noise Immunity Characteristic of CMOS Devices
  • For high reliability versions see part 54HC4060
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 2.592mm² (4017.767mil²)
X: 1610µm (63mil)
Y: 1610µm (63mil)
  Request Pad Layout

In Stock: Available on request
Product Families: Used for this device are tabulated below.
Functional:
  • I/P Level: CMOS/LVTTL
  • O/P Level: CMOS
  • Function: Binary Counter
  • Bits: 14
  • 3-State O/P: No
Specification:
VCC (Min): 2.00V
VCC (Max): 6.00V
fMIN @ VNOM: 45MHz
tpd (Max) @ VNOM: 16.0ns
ICC (Max) @ VNOM: 0.06mA
Output Drive (Max): 5.2mA
VNOM (Max): 6.0V
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.