Back to List

Bare Die Data Sheet: 74HCT00

74HCT00 provides x4 independent 2-input NAND gates performing Boolean function Y = (A • B)\ or Y = A\ + B\. Inputs directly accept both standard CMOS & LSTTL outputs. Outputs are buffered for noise immunity + stability.
The device directly replaces legacy National 74HCT00, Motorola 74HCT00, RCA HARRIS 74HCT00 and Texas Instruments SN74HCT00, CD74HCT00.
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
  • Speed of LSTTL with CMOS low power consumption
  • Output Drive Capability:  10 LSTTL loads
  • Inputs directly accept LSTTL
  • Outputs Directly Interface to CMOS, NMOS, and TTL
  • Low Input Current:  1.0µA
  • Lower power alternative to bipolar logic
  • For high reliability versions see part 54HCT00
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 1.87mm² (2899.265mil²)
X: 1494µm (59mil)
Y: 1252µm (49mil)
  Request Pad Layout

In Stock: Available on request
Product Families: Used for this device are tabulated below.
Functional:
  • I/P Level: CMOS/TTL
  • O/P Level: CMOS
  • Bits: 4
  • Schmitt Trigger: No
Specification:
VCC (Min): 4.50V
VCC (Max): 5.50V
fMIN @ VNOM: 25MHz
tpd (Max) @ VNOM: 22.0ns
ICC (Max) @ VNOM: 0.0100mA
VNOM (Max): 5.5V
Output Drive (Max): 4mA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.