Back to List

Bare Die Data Sheet: 74HC132

The 74HC132 is a Quad 2-Input NAND Gate with Schmitt-Trigger Inputs fabricated using a 2.5µm 5V CMOS process and has the same high speed performance of LSTTL combined with CMOS low power consumption.
The device directly replaces legacy National 74HC132, Motorola 74HC132 and Texas Instruments SN74HC132, CD74HC132.
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
  • Input hysteresis characteristics transform slowly changing input signals into sharply defined jitter-free output
  • High Speed, tPD = 11ns @ 5V (Typ.)
  • Output Drive Capability:  10 LSTTL loads
  • Outputs Directly Interface to CMOS, NMOS, and TTL
  • Operating Voltage Range: 2.0 to 6.0V
  • Low Input Current:  1.0µA
  • Input protection against static discharge & transient excess voltages
  • High Noise Immunity Characteristic of CMOS Devices
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 1.56mm² (2418.008mil²)
X: 1300µm (51mil)
Y: 1200µm (47mil)
  Request Pad Layout

In Stock: 29415
Product Families: Used for this device are tabulated below.
Functional:
  • I/P Level: CMOS
  • O/P Level: CMOS
  • Bits: 4
  • Schmitt Trigger: Yes
Specification:
VCC (Min): 2.00V
VCC (Max): 6.00V
fMIN @ VNOM: 70MHz
tpd (Max) @ VNOM: 26.0ns
ICC (Max) @ VNOM: 0.0100mA
VNOM (Max): 6.0V
Output Drive (Max): 5mA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.