Back to List

Bare Die Data Sheet: 54AC00

54AC00 provides x4 independent 2-input NAND gates performing Boolean function Y = (A • B)\ or Y = A\ + B\. Inputs accept standard CMOS outputs & LSTTL outputs with pull-up resistors. Outputs are buffered for noise immunity + stability.
The device directly replaces legacy National (NSC) 54AC00, Motorola (MOT) 54AC00, RCA HARRIS 54AC00, Texas Instruments (TI) SN54AC00 and CD54AC00.
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
  • Performs Boolean function Y = (A • B)\ or Y = A\ + B\
  • Outputs Source/Sink 24 mA
  • Outputs Directly Interface to CMOS, NMOS, and TTL
  • Low Input Current: 1µA
  • Operating Voltage Range: 2.0 to 6.0V
  • Direct drop-in replacement for obsolete components in long term programs
  • Military temperature range
  • Function compatible with 54HC00 or 54LS00
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 1.44mm² (2232.007mil²)
X: 1200µm (47mil)
Y: 1200µm (47mil)
  Request Pad Layout

In Stock: 4003
Product Families: Used for this device are tabulated below.
Functional:
  • I/P Level: CMOS
  • O/P Level: CMOS
  • Bits: 4
  • Schmitt Trigger: No
Specification:
VCC (Min): 2.00V
VCC (Max): 6.00V
fMIN @ VNOM: 100MHz
tpd (Max) @ VNOM: 8.5ns
ICC (Max) @ VNOM: 0.0800mA
VNOM (Max): 5.5V
Output Drive (Max): 24mA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.