Back to List

Bare Die Data Sheet: 74HC74

Dual D-type flip-flop made in 2.5µm 5V CMOS. Each flip-flop has separate data, set, reset, clock inputs & QQ\ outputs. D-Input level transfers to Q output on positive clock pulse. Set & Reset lines are clock independent, set via high levels.
The device directly replaces legacy Fairchild 74HC74, 74HC74A, National MM74HC74, MM74HC74A, 74HC74 and Motorola 74HC74A or Texas Instruments SN74HC74, CD74HC74 or 74HC74.
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
  • Output Drive Capability: 10 LSTTL Loads
  • Outputs directly interface to CMOS, NMOS, and TTL
  • Asynchronous Set-Reset Capability
  • ±4mA Output Drive at 5V
  • Operating Voltage Range: 2.0 to 6.0V
  • Function compatible with 74LS74
  • Direct drop-in replacement for obsolete components in long term programs
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 1.668mm² (2585.436mil²)
X: 1194µm (47mil)
Y: 1397µm (55mil)
  Request Pad Layout

In Stock: Available on request
Product Families: Used for this device are tabulated below.
Functional:
  • I/P Level: CMOS
  • O/P Level: CMOS
  • Bits: 2
  • 3-State O/P: No
Specification:
VCC (Min): 2.00V
VCC (Max): 6.00V
fMIN @ VNOM: 28MHz
tpd (Max) @ VNOM: 21.0ns
ICC (Max) @ VNOM: 0.0200mA
VNOM (Max): 6.0V
Output Drive (Max): 5.2mA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.