Back to List

Bare Die Data Sheet: 54ACT574

The 54ACT574 integrates eight D-type Flip-Flops, a buffered common Clock (CLK) and a buffered common Output Enable (OE). The information presented to the D-type inputs is stored in the flip-flops on the LOW-to-HIGH Clock (CLK) transition.
This device directly replaces legacy Texas Instruments (TI) SN54ACT574 or CD54ACT574 and Fairchild / National 54ACT574.
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
  • Propagation delay:  13.5ns max
  • Outputs Source/Sink 24mA
  • Inputs directly accept LSTTL
  • Outputs Directly Interface to CMOS, NMOS, and TTL
  • Low Input Current:  1.0µA
  • Lower power alternative to bipolar logic
  • Full military temperature range
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 2.392mm² (3708.386mil²)
X: 1450µm (57mil)
Y: 1650µm (65mil)
  Request Pad Layout

In Stock: Available on request
Product Families: Used for this device are tabulated below.
Functional:
  • I/P Level: CMOS/TTL
  • O/P Level: CMOS
  • Bits: 8
  • 3-State O/P: Yes
Specification:
VCC (Min): 4.50V
VCC (Max): 5.50V
fMIN @ VNOM: 70MHz
tpd (Max) @ VNOM: 13.5ns
ICC (Max) @ VNOM: 0.1600mA
VNOM (Max): 5.5V
Output Drive (Max): 24.0mA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.