Back to List

Bare Die Data Sheet: CD4050B

The CD4050B Non-Inverting Hex Buffer is fabricated on a 3µm 15CMOS process & is used as a Hex Buffer, CMOS to TTL converter or CMOS current driver. Logic levels convert on single supply & VIH can exceed VDD due to modified inputs.
Direct replacement for legacy Fairchild CD4050B, National CD4050B, Motorola MC14050B, Harris or RCA CD4050BH & Texas Instruments CD4050BE. Operates over the full military temperature range & is well suited for high reliability applications.
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
  • High Input Voltage up to 20V
  • Used as Hex buffers, CMOS to DTL/ TTL converters, or as CMOS current drivers
  • Logic level conversion using only one supply voltage
  • Inputs allow voltages greater than VDD
  • High Source and Sink Current
  • x2 TTL load drive
  • Specified at 5V, 10V & 15V
  • Low Input Current:  1.0µA
  • High Noise Immunity Characteristic of CMOS Devices
  • Military Temperature Range for High Reliability
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 2.091mm² (3240.948mil²)
X: 1524µm (60mil)
Y: 1372µm (54mil)
  Request Pad Layout

In Stock: Available on request
Product Families: Used for this device are tabulated below.
Functional:
  • I/P Level: CMOS
  • O/P Level: CMOS
  • Bits: 6
  • 3-State O/P: No
  • Schmitt Trigger: No
Specification:
VCC (Min): 3.00V
VCC (Max): 18.00V
fMIN @ VNOM: 8MHz
tpd (Max) @ VNOM: 140.0ns
ICC (Max) @ VNOM: 0.0020mA
VNOM (Max): 10.0V
Output Drive (Max): 6.4mA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.