Please select a product from the list below:
Available Products:
-
5407
The 5407 Hex TTL Buffers / Drivers perform Boolean function Y = A in positive logic and feature 30V open-collector outputs. The device interfaces high-level circuits, drives high current loads and buffers TTL inputs.
-
54AC244
The 54AC244 8-bit buffer/line driver with 3-state outputs is produced on a 1.5µm 5V CMOS process. The device features non-inverting outputs & x2 active-low output enables, suitable for driving clocks, memory addresses & other bus orientated systems.
-
54ACT244
The 54ACT244 8-bit buffer/line driver with 3-state outputs is produced on a 1.5µm 5V CMOS process. The device features non-inverting outputs & x2 active-low output enables, suitable for driving clocks, memory addresses & other bus orientated systems.
-
54HC125
The 54HC125 is a 4-bit non-inverting buffer/line driver with 3-state outputs. The 3-state outputs are controlled by the output enable input. A HIGH at the output enable input causes the outputs to assume a HIGH impedance OFF-state.
-
54HC241
The 54HC241 is an 8-bit non-inverting buffer/line driver with 3-state outputs. The device has one active low enable & one active high enable. Each enable independently controls 4 buffers.
-
54HC244
The 54HC244 8-bit buffer/line driver with 3-state outputs is produced on a 2.5µm 5V CMOS process. The device features non-inverting outputs & two active-low output enables, suitable for driving clocks, memory addresses & other bus orientated systems.
-
54HCT244
The 54HCT244 8-bit buffer/line driver with 3-state outputs is produced on a 2.5µm 5V CMOS process. The device features non-inverting outputs & two active-low output enables, suitable for driving clocks, memory addresses & bus orientated systems.
-
54LVC1G125
The 54LVC1G125 is a single non-inverting buffer/line driver with 3-state output. The buffer can be driven by either 3.3V or 5V inputs enabling use of this device in a mixed 3.3V and 5V environment.
-
54LVC1G34
The 54LVC1G34 single buffer gate performs the Boolean function Y = A. The buffer can be driven by either 3.3V or 5V inputs enabling use of this device in a mixed 3.3V and 5V environment.
-
7407
The 7407 Hex TTL Buffers / Drivers perform Boolean function Y = A in positive logic and feature 30V open-collector outputs. The device interfaces high-level circuits, drives high current loads and buffers TTL inputs.
-
74AC244
The 74AC244 8-bit buffer/line driver with 3-state outputs is produced on a 1.5µm 5V CMOS process. The device features non-inverting outputs & x2 active-low output enables, suitable for driving clocks, memory addresses & other bus orientated systems.
-
74ACT244
The 74ACT244 8-bit buffer/line driver with 3-state outputs is produced on a 1.5µm 5V CMOS process. The device features non-inverting outputs & x2 active-low output enables, suitable for driving clocks, memory addresses & other bus orientated systems.
-
74HC125
The 74HC125 is a 4-bit non-inverting buffer/line driver with 3-state outputs. The 3-state outputs are controlled by the output enable input. A HIGH at the output enable input causes the outputs to assume a HIGH impedance OFF-state.
-
74HC241
The 74HC241 is an 8-bit non-inverting buffer/line driver with 3-state outputs. The device has one active low enable & one active high enable. Each enable independently controls 4 buffers.
-
74HC244
The 74HC244 8-bit buffer/line driver with 3-state outputs is produced on a 2.5µm 5V CMOS process. The device features non-inverting outputs & two active-low output enables, suitable for driving clocks, memory addresses & other bus orientated systems.
-
74HCT244
The 74HCT244 8-bit buffer/line driver with 3-state outputs is produced on a 2.5µm 5V CMOS process. The device features non-inverting outputs & two active-low output enables, suitable for driving clocks, memory addresses & bus orientated systems.
-
74LVC1G125
The 74LVC1G125 is a single non-inverting buffer/line driver with 3-state output. The buffer can be driven by either 3.3V or 5V inputs enabling use of this device in a mixed 3.3V and 5V environment.
-
74LVC1G34
The 74LVC1G34 single buffer gate performs the Boolean function Y = A. The buffer can be driven by either 3.3V or 5V inputs enabling use of this device in a mixed 3.3V and 5V environment.
-
CD4050B
The CD4050B Non-Inverting Hex Buffer is fabricated on a 3µm 15CMOS process & is used as a Hex Buffer, CMOS to TTL converter or CMOS current driver. Logic levels convert on single supply & VIH can exceed VDD due to modified inputs.