Suited for commercial applications, this bare die directly replaces Fairchild (FCH), National (NSC) 74ACT14, Motorola (MOT) MC4ACT14 & Texas Instruments (TI) SN74ACT14, CD74ACT14. Active electrical replacement/equivalent for bipolar 54LS14 & 54F14.
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
- Schmitt-Trigger Inputs
- Inputs Directly Interface TTL
- High Output Drive Capability: 24mA
- Typical propagation delay below 10 nanoseconds
- Speed of LSTTL with CMOS low power consumption
- Outputs Directly Interface to CMOS, NMOS, and TTL
- Low power dissipation: 2µA max at 25°C
- Operating Voltage Range: 4.5 to 5.5V
- Lower power alternative to bipolar logic
Vendor:
Silicon Supplies
Electrical Datasheet
Die Physical Data:
Footprint: 1.397mm² (2165.357mil²)
X: 1270µm (50mil)
Y: 1100µm (43mil)
Request Pad Layout
In Stock: Available on request
Silicon Supplies
Electrical Datasheet
Die Physical Data:
Footprint: 1.397mm² (2165.357mil²)
X: 1270µm (50mil)
Y: 1100µm (43mil)
Request Pad Layout
In Stock: Available on request
Product Families: Used for this device are tabulated below.
Functional:
- I/P Level: CMOS/TTL
- O/P Level: CMOS
- Bits: 6
- 3-State O/P: No
- Schmitt Trigger: Yes
Specification:
VCC (Min): 4.50V
VCC (Max): 4.50V
fMIN @ VNOM: 90MHz
tpd (Max) @ VNOM: 11.0ns
ICC (Max) @ VNOM: 0.0200mA
VNOM (Max): 5.5V
Output Drive (Max): 24.0mA
VCC (Max): 4.50V
fMIN @ VNOM: 90MHz
tpd (Max) @ VNOM: 11.0ns
ICC (Max) @ VNOM: 0.0200mA
VNOM (Max): 5.5V
Output Drive (Max): 24.0mA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.