Back to List

Bare Die Data Sheet: LM135A


The LM135A linear-output temperature sensor operates over a wide -55°C to 200°C temperature range & can be specifically calibrated for the application. The small size, low impedance and linear output of the device enables simple circuit integration.
This part directly replaces legacy National Semiconductor (NSC) / Texas Instruments (TI) LM135A MD8 OR LM135A and ST Micro LM135A
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
  • Wide temperature range: -55 to +200°C
  • 0.5% calibrated accuracy at 25°C
  • Single-point calibration for high precision
  • Operates from 400µA to 5mA
  • <1Ω dynamic impedance
  • Linear output
  • Intermittent operation capability at 200°C
  • Small size for high integration
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 1.575mm² (2441.258mil²)
X: 1500µm (59mil)
Y: 1050µm (41mil)
  Request Pad Layout

In Stock: Available on request
Product Families: Used for this device are tabulated below.
Functional:
  • Interface: Analog
  • Shutdown: No
Specification:
Temp Range: -55 to 200°C
VS (Min): 3.00V
VS (Max): 5.00V
Local Accuracy(Max): 1.0±°C
Sensor Gain: 10.00mV/°C
IQ (Max): 450µA
Z(O): 0.5Ω
Functional:
  • Interface: Analog
  • Shutdown: No
Specification:
Temp Range: -55 to 200°C
Local Accuracy(Max): 1.0±°C
VS (Min): 3.0V
VS (Max): 5.0V
IQ (Max): 450µA
Sensor Gain: 10.00mV/°C
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.