Back to List

Bare Die Data Sheet: SiS3950-ADJ

Low-noise, ultra-low dropout linear regulator with 2.5V-6V input & 500mA output current. The part delivers very low power consumption & integrates rugged protection features. Simple operation & small-size passive compatibility provide ease of use.
With very small die size this regulator suits applications needing low power lower voltage regulation and high integration. Designed to operate with microsize passives, the device presents a very small form factor.
Features:
  • Adjustable output between 1V - 5V
  • Low dropout voltage:
    • 220mV (IOUT = 500mA)
    • 45mV (IOUT = 100mA)
  • Low noise (10Hz to 100kHz):
    • 60µVRMS (VOUT = 1V)
    • 194µVRMS (VOUT = 3.3V)
    • 305µVRMS (VOUT = 5V)
  • ±2% voltage accuracy at 500mA
  • Low Power: 250µA, VIN = 4.2V, IOUT = 500mA
  • Logic-controlled shutdown
  • Fast transient response & Under Voltage Lockout
  • Output current limited
  • Short-Circuit and Thermal Overload protection.
  • Operates with smallest size passive.
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 0.653mm² (1011.843mil²)
X: 680µm (27mil)
Y: 960µm (38mil)
  Request Pad Layout

In Stock: 24435
Product Families: Used for this device are tabulated below.
Functional:
  • Output: Adjustable Output
  • Output Capacitor: Cap Free, Ceramic
Specification:
VIN (MIN): 2.50V
VIN (MAX): 6.00V
IOUT (MAX): 0.50A
VOUT (MIN): 1.00V
VOUT (MAX): 5.00V
VDO: 220mV
Accuracy: 2.00%
IQ: 0.250mA
Noise Figure: 60.0µVrms
PSRR @ 100KHz: 43dB
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.