Back to List

Bare Die Data Sheet: LM120K-12


LM120K-12 3-terminal fixed -12V negative regulator supplies >= 1.5A of current & requires only x1 external compensation capacitor at the output. Overload immunity features include internal current limiting, safe-area compensation + thermal shutdown.
This device suits hybrid & MCM designers needing high reliability with fixed 12V negative voltage regulation. This bare die replaces National (NSC) or Texas Instruments (TI) LM120K-12, LM320K-12, LM120KG-12 and LM120KG-12 MD8.
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
  • 4% voltage output tolerance over full temperature range
  • Wide input voltage range
  • Internal Short-Circuit Current Limiting
  • Internal Thermal Overload Protection
  • No external components required
  • Military Temperature Range for High Reliability
  • Provides Point-of-Source regulation with lower noise
  • x2 magnitude impedance improvement with lower bias current and noise when replacing Zener diode/resistor combinations
  • Can be used with power-pass elements to make high-current voltage regulators
  • Positive Voltage complement is LM140K-12
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 3.955mm² (6130.269mil²)
X: 2260µm (89mil)
Y: 1750µm (69mil)
  Request Pad Layout

In Stock: Available on request
Product Families: Used for this device are tabulated below.
Functional:
  • Output: Fixed Output, Negative Output
  • Output Capacitor: Ceramic
Specification:
VIN (MIN): -32.00V
VIN (MAX): -14.00V
IOUT (MAX): 1.50A
VOUT (MIN): -12.30V
VOUT (MAX): -11.70V
VDO: 2,000mV
Accuracy: 2.00%
IQ: 2.000mA
Noise Figure: 400.0µVrms
PSRR @ 100KHz:   n/a
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.