Back to List

Bare Die Data Sheet: CD4016B

The CD4016B quad bilateral switch consists of four independent switches capable of controlling either digital or analog signals for us in signal gating, chopper, modulator, demodulator and CMOS logic implementations.
The device directly replaces legacy National CD4016B, Motorola MC14016B, RCA Harris CD4016A and Texas Instruments CD4016B..
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
  • Diode protection on all inputs
  • Linear transfer characteristics
  • Low Noise - 12 nV/√Cycle, f = 1.0 kHz typical
  • High Input Voltage up to 20V
  • Military Temperature Range for High Reliability

Applications:

  • Analog signal switching/multiplexing
  • Signal gating
  • Squelch control
  • Chopper
  • Modulator/Demodulator
  • Commutating switch
  • Digital signal switching/multiplexing
  • CMOS logic implementation
  • Analog-to-digital/digital-to-analog conversion
  • Digital control of frequency, impedance, phase, and analog-signal gain
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 2.163mm² (3352.967mil²)
X: 1690µm (67mil)
Y: 1280µm (50mil)
  Request Pad Layout

In Stock: 19421
Product Families: Used for this device are tabulated below.
Functional:
  • Switch Type: SPST
  • Channels: 4
Specification:
RON: 280.00Ω
BW (Max): 40MHz
VCC (Min): 3.00V
VCC (Max): 18.00V
IO (CONT): 10A
Output Drive (Max):   n/a
ICC (Max): 1.00µA
ICC (Max) @ VNOM: 30.00mA
Functional:
  • Switch Type: SPST
  • Channels: 4
  • 3-State O/P: No
Specification:
RON: 280Ω
RON (Max): 400Ω
BW (Max): 40MHz
VCC (Min): 3.00V
VCC (Max): 18.00V
IO (CONT): 10A
ICC (Max): 1µA
ICC (Max) @ VNOM: 30.0mA
Functional:
  • Channels: 4
  • Config: 1:1 SPST
Specification:
VCC (Min): 3.00V
VCC (Max): 18.00V
RON: 280.00Ω
RON (Max): 400.0Ω
BW (Max): 40MHz
VIO (Min): -0.50V
VIO (Max): 18.50V
IIO (Cont): 10mA
ICC (Max) @ VNOM: 30.00µA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.