Back to List

Bare Die Data Sheet: 74LVC2G66


The 74LVC2G66 Dual Single-Pole Single-Throw Analog Switch supports switching of analog and digital signals in both directions across the full supply range.
The device is a direct replacement for NXP 74LVC2G66 or Texas Instruments (TI) SN74LVC2G66 and suits use in highly integrated miniature sensor applications.
Features:
  • Ideal for small form factor high integration applications
  • Wide supply voltage: VCC 1.65V - 5.5V
  • Very low rON : 6Ω Typ, VCC = 4.5V
  • High speed: tpd 0.8ns Max, VCC = 3.3V
  • Switch current capability: 32mA
  • TTL input compatibility (VCC = 3.3V)
  • Enable inputs accept up to 5.5V
  • Rail-to-Rail Input / Output
  • High noise immunity
  • Tiny Die size
  • Committed long term support with no die mask changes

Applications:

  • Analog-to-digital or Digital-to-analog conversion
  • Signal gating
  • Chopping
  • Modulation / De-modulation
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 0.389mm² (602.642mil²)
X: 720µm (28mil)
Y: 540µm (21mil)
  Request Pad Layout

In Stock: Available on request
Product Families: Used for this device are tabulated below.
Functional:
  • Switch Type: SPST
  • Channels: 2
Specification:
RON: 6.00Ω
BW (Max): 150MHz
VCC (Min): 1.65V
VCC (Max): 5.50V
IO (CONT): 50A
Output Drive (Max): 32mA
ICC (Max): 0.00µA
ICC (Max) @ VNOM: 10.00mA
Functional:
  • Switch Type: SPST
  • Channels: 2
  • 3-State O/P: No
Specification:
RON: 6Ω
RON (Max): 0Ω
BW (Max): 150MHz
VCC (Min): 1.65V
VCC (Max): 5.50V
IO (CONT): 50A
ICC (Max): 0µA
ICC (Max) @ VNOM: 10.0mA
Functional:
  • Channels: 2
  • Config: 1:1 SPST
Specification:
VCC (Min): 1.65V
VCC (Max): 5.50V
RON: 6.00Ω
RON (Max): 10.0Ω
BW (Max): 150MHz
VIO (Min): 0.00V
VIO (Max): 5.50V
IIO (Cont): 50mA
ICC (Max) @ VNOM: 10.00µA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.