Back to List

Bare Die Data Sheet: CD4071B REV 2

CD4071B provides the system designer with direct implementation of the positive-logic OR function. With equal source & sink current capabilities, the device drives x2 low power TTL loads or x1 LSTTL load over the full military temperature range.
The device directly replaces legacy National / Fairchild CD4071B, RCA HARRIS MC14071B and Texas Instruments CD4071B.
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
  • High Input Voltage up to 20V
  • Symmetrical Output Characteristics
  • Specified at 5V, 10V & 15V
  • Suits low power dissipation and/or high noise immunity applications
  • Buffered Inputs for high gain & improved transfer characteristics
  • ESD protection diodes on Inputs
  • Military Temperature Range for High Reliability
  • Smaller die size versus peers
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 2.4mm² (3720.007mil²)
X: 1500µm (59mil)
Y: 1600µm (63mil)
  Request Pad Layout

In Stock: Available on request
Product Families: Used for this device are tabulated below.
Functional:
  • I/P Level: CMOS
  • O/P Level: CMOS
  • Bits: 4
Specification:
VCC (Min): 3.00V
VCC (Max): 18.00V
fMIN @ VNOM: 8MHz
tpd (Max) @ VNOM: 80.0ns
ICC (Max) @ VNOM: 0.0005mA
VNOM (Max): 15.0V
Output Drive (Max): 4.2mA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.