Back to List

Bare Die Data Sheet: 74HC03

Fabricated in 2.5µm 5V CMOS, 74HC03 comprises 3 stages with buffered output for high noise immunity & stability. With an external pull-up resistor the device can be used in wired AND config. The device also finds use in current sink applications.
The device directly replaces legacy National 74HC03, Motorola 74HC03, RCA Harris 74HC03 and Texas Instruments SN74HC03, CD74HC03.
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
  • Output Drive Capability: 10 LSTTL Loads
  • Outputs Directly Interface to CMOS, NMOS, and TTL
  • Low Input Current: 1µA
  • Operating Voltage Range: 2.0 to 6.0V
  • Direct drop-in replacement for obsolete components in long term programs
  • Function compatible with 74LS03
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 1.62mm² (2511.008mil²)
X: 1200µm (47mil)
Y: 1350µm (53mil)
  Request Pad Layout

In Stock: Available on request
Product Families: Used for this device are tabulated below.
Functional:
  • I/P Level: CMOS
  • O/P Level: CMOS
  • Bits: 4
  • Schmitt Trigger: No
Specification:
VCC (Min): 2.00V
VCC (Max): 6.00V
fMIN @ VNOM: 70MHz
tpd (Max) @ VNOM: 26.0ns
ICC (Max) @ VNOM: 0.0100mA
VNOM (Max): 6.0V
Output Drive (Max): 5mA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.