The device directly replaces legacy National 54HC03, Motorola 54HC03, RCA Harris 54HC03 and Texas Instruments SN54HC03, CD54HC03.
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
- Military Temperature Range for high reliability
- Output Drive Capability: 10 LSTTL Loads
- Outputs Directly Interface to CMOS, NMOS, and TTL
- Low Input Current: 1µA
- Operating Voltage Range: 2.0 to 6.0V
- Direct drop-in replacement for obsolete components in long term programs
- Function compatible with 54LS03
Vendor:
Silicon Supplies
Electrical Datasheet
Die Physical Data:
Footprint: 1.62mm² (2511.008mil²)
X: 1200µm (47mil)
Y: 1350µm (53mil)
Request Pad Layout
In Stock: Available on request
Silicon Supplies
Electrical Datasheet
Die Physical Data:
Footprint: 1.62mm² (2511.008mil²)
X: 1200µm (47mil)
Y: 1350µm (53mil)
Request Pad Layout
In Stock: Available on request
Product Families: Used for this device are tabulated below.
Functional:
- I/P Level: CMOS
- O/P Level: CMOS
- Bits: 4
- Schmitt Trigger: No
Specification:
VCC (Min): 2.00V
VCC (Max): 6.00V
fMIN @ VNOM: 70MHz
tpd (Max) @ VNOM: 31.0ns
ICC (Max) @ VNOM: 0.0400mA
VNOM (Max): 6.0V
Output Drive (Max): 5mA
VCC (Max): 6.00V
fMIN @ VNOM: 70MHz
tpd (Max) @ VNOM: 31.0ns
ICC (Max) @ VNOM: 0.0400mA
VNOM (Max): 6.0V
Output Drive (Max): 5mA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.