Back to List

Bare Die Data Sheet: 54ACT38

54ACT38 provides x4 independent 2-input NAND gates performing Boolean function Y = (A • B)\ or Y = A\ + B\. Inputs directly accept standard CMOS outputs & LSTTL outputs. Open-drain outputs enable wired-OR or wired-AND functionality.
The device is a functional replacement for the obsoleted National 54F38, Fairchild 74F38 and Texas Instruments SN54F38 or SN74F38. The device provides the same speed of the F series with the same TTL input functionality.
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
  • Inputs Directly Interface TTL
  • High Output Drive Capability:  24mA
  • Open-drain output for wired-OR/wired-AND function
  • Speed of LSTTL with CMOS low power consumption
  • Outputs Directly Interface to CMOS, NMOS, and TTL
  • Low power dissipation:  4µA max at 25°C
  • Operating Voltage Range: 4.5 to 5.5V
  • Lower power alternative to bipolar logic
  • Full military temperature range
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 1.19mm² (1844.506mil²)
X: 1000µm (39mil)
Y: 1190µm (47mil)
  Request Pad Layout

In Stock: Available on request
Product Families: Used for this device are tabulated below.
Functional:
  • I/P Level: CMOS/TTL
  • O/P Level: CMOS
  • Bits: 4
  • Schmitt Trigger: No
Specification:
VCC (Min): 4.50V
VCC (Max): 5.50V
fMIN @ VNOM: 90MHz
tpd (Max) @ VNOM: 13.0ns
ICC (Max) @ VNOM: 0.0800mA
VNOM (Max): 5.5V
Output Drive (Max): 24mA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.