Back to List

Bare Die Data Sheet: 54AC05

54AC05 consists of x6 independent inverters with open-drain outputs which can connect with other open-drain outputs to form active LOW wired-OR or active HIGH wired-AND logic functions. Open drain outputs need pullup resistors to perform correctly.
The device directly replaces legacy Motorola (MOT) MC54AC05, RCA HARRIS CD54AC05 and Texas Instruments (TI) CD54AC05.
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
  • Performs the Boolean function: Y = Ā
  • Outputs Source/Sink 24 mA
  • Outputs Directly Interface to CMOS, NMOS, and TTL
  • Low Input Current: 1µA
  • Operating Voltage Range: 2.0 to 6.0V
  • Direct drop-in replacement for obsolete components in long term programs
  • Military temperature range
  • Function compatible with 54HC05
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 1.386mm² (2148.307mil²)
X: 1100µm (43mil)
Y: 1260µm (50mil)
  Request Pad Layout

In Stock: Available on request
Product Families: Used for this device are tabulated below.
Functional:
  • I/P Level: CMOS
  • O/P Level: CMOS
  • Bits: 6
  • 3-State O/P: No
  • Schmitt Trigger: No
Specification:
VCC (Min): 1.50V
VCC (Max): 5.50V
fMIN @ VNOM: 100MHz
tpd (Max) @ VNOM: 8.2ns
ICC (Max) @ VNOM: 0.0800mA
VNOM (Max): 5.5V
Output Drive (Max): 24.0mA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.