Back to List

Bare Die Data Sheet: 5406


The 5406 Hex TTL Inverter Buffers / Drivers perform Boolean function Y = Ā in positive logic & feature 30V open-collector outputs. The device interfaces high-level circuits, drives high current loads & buffers TTL inputs.
The device directly replaces legacy Texas Instruments 5406 or SN5406.
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
  • High Sink-Current Capability: 30mA
  • High Voltage Open-Collector Driver
  • Minimum 30V breakdown voltage
  • Input Clamping Diodes to minimize transmission-line effects
  • TTL compatible inputs
  • Direct drop-in replacement for obsolete components in long term programs
  • Function compatible with 54LS06

Applications:

  • Conversion of TTL voltage levels to MOS levels
  • Driving high current loads e.g. Lamps or Relays
  • Buffers for driving TTL inputs
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 2.03mm² (3146.510mil²)
X: 1450µm (57mil)
Y: 1400µm (55mil)
  Request Pad Layout

In Stock: Available on request
Product Families: Used for this device are tabulated below.
Functional:
  • I/P Level: TTL
  • O/P Level: TTL
  • Bits: 6
  • 3-State O/P: No
  • Schmitt Trigger: No
Specification:
VCC (Min): 4.50V
VCC (Max): 5.50V
fMIN @ VNOM: 75MHz
tpd (Max) @ VNOM: 23.0ns
ICC (Max) @ VNOM: 51.0000mA
VNOM (Max): 5.0V
Output Drive (Max): 30.0mA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.