Back to List

Bare Die Data Sheet: 1N5822

40 Volt 3 Amp Schottky Rectifier Diode specified at 125°C maximum junction temperature. Metalized with Aluminum on topside & Silver bottom side for wirebonding assembly. The device offers faster switching speeds than equivalent p-n rectifiers.
This part directly replaces Microsemi (MSC), CDI and Sensitron 1N5822 or CD5822. Orderable grades H & K are alternatives to JANHC1N5822, JANHCA1N5822 or JANKC1N5822, JANKCA1N5822. MIL-PRF-19500 equivalent flow can be specified on request.
Features:
  • Guardring for over-voltage protection and high reliability
  • Very low forward voltage drop
  • Very small conduction losses, low stored charge
  • Extremely fast switching, high frequency operation
  • High forward surge current capability.

Applications:

  • Polarity Protection
  • Free-Wheeling
  • DC/DC converters
  • Low Voltage High Frequency Inverters
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 2.244mm² (3481mil²)
X: 1498µm (59mil)
Y: 1498µm (59mil)
  Request Pad Layout

In Stock: 20602
Product Families: Used for this device are tabulated below.
Functional:
  • Assembly: Wire bond
  • TJ(MAX): 125°C
Specification:
VRWM: 40V
IF: 3A
IFSM: 80A
VF @ IF: 0.50V
VF @ IF 125°C: 0.39V
IR(MAX) @ VR 25°C: 0.15mA
IR(MAX) @ VR Thigh: 24.0mA
CT(Max): 265pF
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.