Back to List

Bare Die Data Sheet: TPD5030

The TPD5030 monolithic dual ESD protection diode configures to protect either one bidirectional line or two unidirectional lines with fast response time and lower operating voltage.
Availability in bare die form delivers the smallest possible wirebond form factor. Used as single bidirectional line protection, this chip offers an efficient replacement for larger TVS arrays with sub-optimal bondouts.
  • Transient Protection for Data Lines:
    • IEC 61000-4-2 (ESD) ±15kV (Air), ±15kV (Contact)
    • IEC 61000-4-4 (EFT) 40A (tP=5/50ns).
  • Configurable as x2 unidirectional channels or x1 bidirectional channel
  • Very low leakage:
    • 1nA Maximum at 25°C (measured in low light conditions)
    • 10nA Typical at 125°C.
  • Low diode capacitance
  • 5V stand-off voltage
  • Simple bondout for bidirectional line protection
  • Very small form factor capable of ultra-thin height profile.


  • Data line protection
  • Small-size high integration portable electronics
  • MCM, MCP and SiP integrations.
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 0.101mm² (157.325mil²)
X: 290µm (11mil)
Y: 350µm (14mil)
  Request Pad Layout

In Stock: 747785
Product Families: Used for this device are tabulated below.
  • Channel: x1 Bi / x2 Uni
VBR (Min): 6.5V
VBR (Max): 8.50V
IT: 5mA
VC: 9.7V
IPP: 11.00A
IR(MAX) @ VR 25°C: 2.0nA
  • Channels: 2
  • Bi-/Uni-Directional: x1 Bi / x2 Uni
  • Interface: -
VBR (Min): 6.5V
VC: 9.7V
ILEAK (io): 2nA
rD: 0.6Ω
Cio: 25.0pF
IEC 61000-4-2 Air-Gap: 30±kV
IEC 61000-4-2 Contact: 30±kV
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.