Back to List

Bare Die Data Sheet: LM358


Two independent, high gain, frequency compensated amplifiers operating from single 3V-32V or split supplies. Supply current per amp is approximately 1/5th of industry 741. Supply current drain is independent of voltage in split-supply operation.
Commercial die designed for smallest size and lower cost. Directly replaces legacy National LM358 MDA OR MWA, Motorola / ON Semi LM358, ST Micro LM358 and Texas Instruments LM358. Is an improved replacement for National LM2904 MDA.
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
  • Temperature compensated bandwidth (unity gain)
  • Temperature compensated IB: 45nA
  • Wide power supply range, single supply: 3V-32V or dual supplies: ±1.5V to ±16V
  • Low VOS: 2mV, and IOS: 5nA
  • Differential input voltage range equal to the power supply voltage
  • Large output voltage: 0V to VCC -1.5V swing
  • Input Common-Mode Voltage range includes ground
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 0.605mm² (937.443mil²)
X: 960µm (38mil)
Y: 630µm (25mil)
  Request Pad Layout

In Stock: 18953
Product Families: Used for this device are tabulated below.
Functional:
  • Channels: 2
Specification:
CMRR (Typ): 85dB
Gain BW: 0.700MHz
IIB (Max): 250.00000nA
VOS (Max): 7.000mV
IO: 30.0mA
IQ per Channel: 0.2500mA
Rail - Rail: In to V-
Slew Rate: 0.30V/µs
VS (Max): 32.00V
VS (Min): 3.00V
VN: 40.0nV√Hz
VOS Drift: 7.0µV/°C
Functional:
  • Channels: 2
  • Shutdown: No
Specification:
CMRR (Typ): 85dB
Gain BW: 0.7000MHz
IIB (Max): 250,000.00pA
VOS (Max): 7.000mV
IO: 30.0mA
IQ per Channel: 0.25000mA
Rail - Rail: In to V-
Slew Rate: 0.3000V/µs
VS (Max): 32.00V
VS (Min): 3.00V
VN: 40.0nV√Hz
VOS Drift: 7.000µV/°C
Functional:
  • Channels: 2
  • Shutdown: No
Specification:
Rail - Rail: In to V-
VS (Min): 3.00V
VS (Max): 32.00V
Gain BW: 0.700MHz
Slew Rate: 0.30V/µs
VOS (Max): 7.000mV
VOS Drift: 7.000µV/°C
IIB (Max): 250.00000nA
VN: 40.0nV√Hz
IQ per Channel: 0.250mA
IO: 30.0mA
CMRR (Typ): 85dB
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.